| CLEAN 2012 |
Economical medium duty non-silicated low foam spray cleaner for all metals. Mild pH. |
Non-silicated aluminum spray. Also safe on most other metals. |
110°F to 160°F 43°C to 71°C |
2% to 5% |
8.5 to 10 |
| CLEAN 2017 |
Low cost heavy-duty spray cleaner. Very low foam. Excellent cleaning of coolants and oils at low, energy saving temperatures. |
Economical heavy duty spray. Low foaming at ambient, very low foam over 100°F (38°C). Safe for steel, cast iron, titanium, and magnesium. Do not use on alumimun, brass, or zinc. |
Ambient to 210°F 99°C |
1% to 5% |
12.6 to 13.1 |
| CLEAN 2023 “Big Al” |
Heavy duty low foam spray washer for aluminum, also suitable for steel, cast iron, and brass. Provides RP for ferrous parts in-process. |
Removing heavy soils, oils, and tapping compounds on aluminum parts. Also for use in multi-metal washing. One week RP for ferrous parts. |
120°F to 160°F 49°C to 71°C |
3% to 5% |
11.7 to 12.2 |
| CLEAN 2029 |
High detergency with controlled foam, great cleaning and good in-process RP. Mild pH means safer working environment. Multi-metal compatible. |
Spray, ultrasonic, or dunker washing of steel, cast iron, and powdered metal parts. Safe on most aluminum and yellow metals when used at lower temperatures. |
125°F to 180°F 52°C to 82°C |
3% to 5% |
10.6 to 11.0 |
| CLEAN 2115 |
High performance non-foaming synthetic washing compound. Good ferrous RP and oil splitting. Long bath life. No phosphates. |
For use in very high-pressure spray applications, deburring and water jet cutting as well as unheated spray washers and spray washers that get a lot of foam-producing contamination. |
Ambient to 140°F 60°C |
3% to 5% |
8.8 to 9.6 |
| CLEAN 2115AL |
Bio-stable synthetic cleaner for very high-pressure washers with short term RP and good aluminum compatibility. |
Very high-pressure washing. Similar to CLEAN 2115, but with better aluminum compatibility. Short term RP. Also used for water jet cutting, leak test and plasma cutting tanks. |
Ambient to 140°F 60°C |
3% to 5% |
8.0 to 9.0 |
| CLEAN 2430 |
Maximum ability to split oils out of cleaner bath. Great cleaning near neutral pH. Multi metal safe. |
Removal of straight oils where oil splitting capability provides very long bath life with good in-process RP for ferrous parts. |
Ambient to 150°F 66°C |
.05% to 5% |
8.0 to 8.8 |
| CLEAN 3011 |
Streak and residue free synthetic cleaner that will remove oils, water soluble cutting grinding fluid residue and leave behind a thin rust inhibiting film. |
Energy saving, low temperature, high-pressure spray cleaning with short term RP for ferrous parts. Also safe on aluminum and Zinc. |
Ambient to 140°F 60°C |
3% to 7% |
9.0 to 9.5 |
| CLEAN B1 |
Surfactant (detergency) booster for heated spray washers. |
Boosting aqueous cleaners. Some defoaming capability. |
120°F to 180°F 49°C to 82°C |
0.1% to 1% |
4.5 to 5.9 |
| CLEAN DF1 |
Non-dimethylsilicone defoamer for alkaline cleaners. No pre-mixing required. |
Foam reduction in cleaners, RP's and coolants. |
50°F to 212°F 10°C to 100°C |
0.1% (1:1,000) |
6.0 to 8.0 |